Communication Chip - ASM485S

ASM485S是国科安芯研制的一款RS-485和RS-422通信芯片。包含一个驱动器和一个接收器。传输速度高达2.5Mbps。在空载或功能禁用时收发器的电流消耗在120µA至500µA之间。驱动器支持短路电流保护和过温保护。接收器输入具有故障安全监测功能,如果输入端开路,则保证逻辑高电平输出。可实现半双工通信。ASM485S采用先进抗辐照加固设计,可应用于商业航天、核电站等高安全需求场景。

Product Details

  • 支持RS-485和RS-422
  • 支持半双工模式
  • 一组接收一组发射
  • 传输速度高达2.5Mbps
  • 总线接收节点数量最大32个
  • 待机电流300uA
  • 工作温度范围: -55°C to 125°C
  • 封装: SOP8
  • SEU: ≥37MeV.cm²/mg或10−5次/器件.天(商业航天级)
  • SEL: ≥37MeV.cm²/mg(商业航天级)
  • TID: ≥100krad(Si)(商业航天级)

封装类型:SOP8

image.png

抗辐照:

  • SEU: ≥37MeV.cm²/mg或10−5次/器件.天(商业航天级)
  • SEL: ≥37MeV.cm²/mg(商业航天级)
  • TID: ≥100krad(Si)(商业航天级)

Solutions

Commercial space motor control system

Commercial space motor control system

It is used in the antenna pointing mechanism to accurately control the antenna pointing; the load mechanism drives the filter wheel switching of the spectrometer, etc.; the control moment gyro controls the high-speed rotating gyro to produce greater control torque; the momentum wheel/reaction flywheel controls the satellite attitude by changing the flywheel speed; the electric servo system controls the engine nozzle swing to achieve thrust vector control; the electric propulsion system controls the ion or Hall thruster for long-term orbit maintenance and maneuvering of the satellite. Provides a complete set of commercial aerospace-grade motor drive series chips such as motor control, pre-drive, MOSFET, etc., adapted to mainstream commercial satellite motors, provides system solution reference design and motor control algorithms, and quickly realizes the design and application of radiation-resistant commercial aerospace-grade motor drive systems.
Commercial Space laser communication module

Commercial Space laser communication module

It is used in commercial aerospace laser communication modules such as EDFA and optical modules, helping commercial aerospace EDFA modules to accurately monitor parameters, real-time signal processing and fast fault response, accurately regulate the power of pump light sources, and have strong anti-irradiation ability in the face of complex radiation environments in space to ensure long-term reliable operation of EDFA. Realize communication and control management and power supply in optical modules, and provide commercial aerospace-grade series chips.
Commercial Space Communication interface system

Commercial Space Communication interface system

It is used in satellite data management subsystems, measurement and control subsystems, thermal control subsystems, propulsion subsystems, attitude control systems (star sensors, gyroscopes, solar sensors, etc.), execution propulsion systems (electric thrust, reaction flywheels, magnetic torques, etc.), communication payloads, remote sensing payloads, navigation payloads, scientific exploration payloads, etc., providing communication interconnection between key components in satellite platforms and payloads, and providing commercial aerospace-grade series communication interface chips.
Nuclear power plant systems and equipment

Nuclear power plant systems and equipment

Used in nuclear power plant intelligent robots, intelligent inspection equipment, circulating water systems, three waste treatment systems, chemical and volume control systems, equipment cooling water systems, ventilation and air conditioning systems, radioactive waste treatment systems, etc. Provides MCU main controller, DCDC and LDO power chips, communication interfaces and other anti-total dose series chips.

Related Products

View All New Products
NEW
Power Management Chip - ASP3605I

Power Management Chip - ASP3605I

ASP3605I is a power management chip developed by Ansilic, fully compatible with LTC3605, featuring high efficiency, low ripple, and high current capability. The chip's specifications such as power efficiency, current, and input/output range are consistent with those of the LTC3605 chip. This chip supports an input voltage range of 4V to 15V and an output voltage range of 0.6V to 5.5V, with 4A output current per channel and a typical operating efficiency of 94%. Support soft error protection.

NEW
MCU - AS32I401

MCU - AS32I401

AS32I401 is an industrial-grade MCU chip based on the RISC-V architecture developed by Ansilic, featuring complete independent controllability, high security, and rich interfaces. Based on the RISC-V architecture, it supports the RV32IMZicsr instruction set with a main frequency of 120MHz, and supports interfaces such as CANFD, Ethernet, LIN, ADC, and DAC. It can be applied in high-safety demand scenarios such as robot joint control, special industrial applications, power systems, and military industries.

NEW
CAN Transceiver - ASM1042I

CAN Transceiver - ASM1042I

ASM1042I is a CAN FD interface chip developed by Ansilic, featuring high data rate, high voltage tolerance, and strong IO compatibility. It supports a data rate of up to 5Mbps, a common-mode input voltage of ±30V, a bus fault protection voltage of ±70V, and is compatible with 3.3V and 5V MCU IO interfaces. It can be applied in high-safety application scenarios such as robots, industrial equipment, and medical devices. Chip design, production, packaging, fully compatible with TJA1042 and TCAN1042.

NEW
Power Management Chip - ASP3605A

Power Management Chip - ASP3605A

ASP3605A is a power management chip developed by Ansilic, fully compatible with LTC3605, featuring high efficiency, low ripple, and high current capability. The chip's specifications such as power efficiency, current, and input/output range are consistent with those of the LTC3605 chip. This chip supports an input voltage range of 4V to 15V and an output voltage range of 0.6V to 5.5V, with 4A output current per channel and a typical operating efficiency of 94%. It supports soft error protection and can provide AEC-Q100 grade 1 automotive specification certification.