电平接口芯片-ASC0102S
ASC0102S 是国科安芯研制的双通道自动双向电平转换芯片,宽电压覆盖 1.65V~5.5V 跨域信号互通,集成上拉电阻适配 I2C 开漏通信,支持IO高阻关断实现低功耗运行,ESD防护性能优异,适用于各类多电压域数字信号交互设备。ASC0102S采用先进抗辐照加固设计,可应用于商业航天、核电站等高安全需求场景。
Product Details
- 无需方向控制信号
- 数据速率:推挽驱动24 Mbps,开漏驱动2 Mbps
- A端口1.65 V ~ 3.6 V,B端口2.3 V ~ 5.5 V(VCCA ≤ VCCB)
- VCC隔离:任一VCC接地时两端口均为高阻态
- 无需电源上电时序
- Ioff 支持部分断电模式
- 工作温度:-55℃ ~ +125℃
- SEU ≥37MeV.cm²/mg或10-5次/器件.天(商业航天级)
- SEL ≥37 MeV.cm²/mg(商业航天级)
- TID ≥100krad(Si)(商业航天级)
- 封装:SOT23-8
封装类型:SOP8
抗辐照:
- SEU: ≥37MeV.cm²/mg或10−5次/器件.天(商业航天级)
- SEL: ≥37MeV.cm²/mg(商业航天级)
- TID: ≥100krad(Si)(商业航天级)
Solutions
Commercial space motor control system
Commercial Space laser communication module
Commercial Space Communication interface system
Nuclear power plant systems and equipment
Product Manual
Related Products
View All New ProductsPower Management Chip - ASP3605I
ASP3605I is a power management chip developed by Ansilic, fully compatible with LTC3605, featuring high efficiency, low ripple, and high current capability. The chip's specifications such as power efficiency, current, and input/output range are consistent with those of the LTC3605 chip. This chip supports an input voltage range of 4V to 15V and an output voltage range of 0.6V to 5.5V, with 4A output current per channel and a typical operating efficiency of 94%. Support soft error protection.
MCU - AS32I401
AS32I401 is an industrial-grade MCU chip based on the RISC-V architecture developed by Ansilic, featuring complete independent controllability, high security, and rich interfaces. Based on the RISC-V architecture, it supports the RV32IMZicsr instruction set with a main frequency of 120MHz, and supports interfaces such as CANFD, Ethernet, LIN, ADC, and DAC. It can be applied in high-safety demand scenarios such as robot joint control, special industrial applications, power systems, and military industries.
CAN Transceiver - ASM1042I
ASM1042I is a CAN FD interface chip developed by Ansilic, featuring high data rate, high voltage tolerance, and strong IO compatibility. It supports a data rate of up to 5Mbps, a common-mode input voltage of ±30V, a bus fault protection voltage of ±70V, and is compatible with 3.3V and 5V MCU IO interfaces. It can be applied in high-safety application scenarios such as robots, industrial equipment, and medical devices. Chip design, production, packaging, fully compatible with TJA1042 and TCAN1042.
Power Management Chip - ASP3605A
ASP3605A is a power management chip developed by Ansilic, fully compatible with LTC3605, featuring high efficiency, low ripple, and high current capability. The chip's specifications such as power efficiency, current, and input/output range are consistent with those of the LTC3605 chip. This chip supports an input voltage range of 4V to 15V and an output voltage range of 0.6V to 5.5V, with 4A output current per channel and a typical operating efficiency of 94%. It supports soft error protection and can provide AEC-Q100 grade 1 automotive specification certification.

