Linear Chip - ASL622S
ASL622S是国科安芯研制的轨到轨运算放大器,芯片支持低电压工作和轨到轨输入输出,以及出色的速度/功耗比,提供优秀的带宽(6.5MHz)和2.9V/μs的压摆率。该运算放大器具有单位增益稳定性和超低输入偏置电流特性,非常适合传感器接口、有源滤波器和便携式应用。ASL622S采用先进抗辐照加固设计,可应用于商业航天、核电站等高安全需求场景。
Product Details
- 高增益带宽积:6.5MHz
- 轨到轨输入和输出
- 低电源电流:在 5V 供电时每个放大器 700 μA
- 输入电压范围:VS = 5.5V 时为 -0.1V 至 +5.6V
- 电源电压范围:+2.5V 至 +5.5V
- 工作温度范围: -55°C to 125°C
- 封装: SOP8
- SEU: ≥37MeV.cm²/mg或10−5次/器件.天(商业航天级)
- SEL: ≥37MeV.cm²/mg(商业航天级)
- TID: ≥100krad(Si)(商业航天级)
封装类型:SOP8
抗辐照:
- SEU: ≥37MeV.cm²/mg或10−5次/器件.天(商业航天级)
- SEL: ≥37MeV.cm²/mg(商业航天级)
- TID: ≥100krad(Si)(商业航天级
Solutions
Commercial space motor control system
Commercial Space laser communication module
Commercial Space Communication interface system
Nuclear power plant systems and equipment
Product Manual
Related Products
View All New ProductsPower Management Chip - ASP3605I
ASP3605I is a power management chip developed by Ansilic, fully compatible with LTC3605, featuring high efficiency, low ripple, and high current capability. The chip's specifications such as power efficiency, current, and input/output range are consistent with those of the LTC3605 chip. This chip supports an input voltage range of 4V to 15V and an output voltage range of 0.6V to 5.5V, with 4A output current per channel and a typical operating efficiency of 94%. Support soft error protection.
MCU - AS32I401
AS32I401 is an industrial-grade MCU chip based on the RISC-V architecture developed by Ansilic, featuring complete independent controllability, high security, and rich interfaces. Based on the RISC-V architecture, it supports the RV32IMZicsr instruction set with a main frequency of 120MHz, and supports interfaces such as CANFD, Ethernet, LIN, ADC, and DAC. It can be applied in high-safety demand scenarios such as robot joint control, special industrial applications, power systems, and military industries.
CAN Transceiver - ASM1042I
ASM1042I is a CAN FD interface chip developed by Ansilic, featuring high data rate, high voltage tolerance, and strong IO compatibility. It supports a data rate of up to 5Mbps, a common-mode input voltage of ±30V, a bus fault protection voltage of ±70V, and is compatible with 3.3V and 5V MCU IO interfaces. It can be applied in high-safety application scenarios such as robots, industrial equipment, and medical devices. Chip design, production, packaging, fully compatible with TJA1042 and TCAN1042.
Power Management Chip - ASP3605A
ASP3605A is a power management chip developed by Ansilic, fully compatible with LTC3605, featuring high efficiency, low ripple, and high current capability. The chip's specifications such as power efficiency, current, and input/output range are consistent with those of the LTC3605 chip. This chip supports an input voltage range of 4V to 15V and an output voltage range of 0.6V to 5.5V, with 4A output current per channel and a typical operating efficiency of 94%. It supports soft error protection and can provide AEC-Q100 grade 1 automotive specification certification.

